dpkg is the base command for handling Debian packages on the system. If you have .deb packages, it is dpkg that allows installation or analysis of their contents. But this program only has a partial view of the Debian universe: it knows what is installed on the system, and whatever it is given on the command line, but knows nothing of the other available packages. As such, it will fail if a dependency is not met. Tools such as apt and aptitude, on the contrary, will create a list of dependencies to install everything as automatically as possible.
dpkg は既に利用できる Debian パッケージのインストールを担当しているツールです (ダウンロード機能を持っていません)。dpkg を使ってパッケージをインストールするには、-i または --install オプションを使ってください。
例 5.2 dpkg を使ったパッケージのインストール
#dpkg -i man-db_2.8.5-2_amd64.deb(Reading database ... 14913 files and directories currently installed.) Preparing to unpack .../man-db_2.8.5-2_amd64.deb ... Unpacking man-db (2.8.5-2) over (2.8.5-2) ... Setting up man-db (2.8.5-2) ... Updating database of manual pages ... Processing triggers for mime-support (3.62) ...
dpkg; we know, thus, at what point any error may have occurred. The installation can also be effected in two stages: first unpacking, then configuration. apt takes advantage of this, limiting the number of calls to dpkg (since each call is costly, due to loading of the database in memory, especially the list of already installed files).
例 5.3 展開と設定を分けて実行
#dpkg --unpack man-db_2.8.5-2_amd64.deb(Reading database ... 14937 files and directories currently installed.) Preparing to unpack man-db_2.8.5-2_amd64.deb ... Unpacking man-db (2.8.5-2) over (2.8.5-2) ... Processing triggers for mime-support (3.62) ... #dpkg --configure man-dbSetting up man-db (2.8.5-2) ... Updating database of manual pages ...
dpkg がパッケージのインストールに失敗し、エラーを返すことがあります。さらに、ユーザがインストールの失敗を無視するように命令すれば、警告が表示されるでしょう。すなわちこれが多くの --force-* 系オプションが用意されている理由です。dpkg の文書によれば dpkg --force-help コマンドでこれらのオプションの完全なリストを見ることが可能です。最もよく目にするエラーはファイルの衝突で、遅かれ早かれこのエラーに遭遇するのは避けられません。パッケージが他のパッケージによってインストール済みのファイルを含んでいる場合、dpkg はパッケージのインストールを拒否します。その場合、以下のメッセージが表示されます。
libgdm (.../libgdm_3.8.3-2_amd64.deb) を展開しています...
パッケージ /var/cache/apt/archives/libgdm_3.8.3-2_amd64.deb の処理中にエラーが発生しました (--unpack):
'/usr/bin/gdmflexiserver' を上書きしようとしています。これはパッケージ gdm3 3.4.1-9 にも存在します--force-overwrite オプションを使うことで dpkg はこのエラーを無視してファイルを上書きします。
--force-* 系のオプションはたくさんありますが、日常的に使うのは --force-overwrite だけです。--force-* 系のオプションは例外的状況のためだけに用意されており、パッケージングメカニズムの定める標準規則を尊重するためには、これらのオプションを使うことは可能な限り避けるべきです。これらの標準規則はシステムの整合性と安定性を守るものであることを忘れないでください。
dpkg with the -r or --remove option, followed by the name of a package, removes that package. This removal is, however, not complete: all of the configuration files, maintainer scripts, log files (system logs) and other user data handled by the package remain. That way disabling the program is easily done by uninstalling it, and it is still possible to quickly reinstall it with the same configuration. To completely remove everything associated with a package, use the -P or --purge option, followed by the package name.
dpkg のオプションについて学びましょう。各オプションは最初に長いオプション、その後に対応する短いオプション (両者は同じ引数を取るのは明らかです) のように記載しています。--listfiles package (または -L) は与えられたパッケージがインストールするファイルを表示します。--search file (または -S) はファイルを含むパッケージを探します。--status package (または -s) はインストールされたパッケージのヘッダを表示します。--list (または -l) はシステムが把握しているパッケージのリストとその状態を表示します。--contents file.deb (または -c) は指定された Debian パッケージに含まれるファイルを表示します。--info file.deb (または -I) は指定された Debian パッケージのヘッダを表示します。
例 5.5 dpkg にさまざまな情報を問い合わせる
$dpkg -L base-passwd/. /usr /usr/sbin /usr/sbin/update-passwd /usr/share /usr/share/base-passwd /usr/share/base-passwd/group.master /usr/share/base-passwd/passwd.master /usr/share/doc /usr/share/doc/base-passwd /usr/share/doc/base-passwd/README /usr/share/doc/base-passwd/changelog.gz /usr/share/doc/base-passwd/copyright /usr/share/doc/base-passwd/users-and-groups.html /usr/share/doc/base-passwd/users-and-groups.txt.gz /usr/share/doc-base /usr/share/doc-base/users-and-groups /usr/share/lintian /usr/share/lintian/overrides /usr/share/lintian/overrides/base-passwd /usr/share/man /usr/share/man/de /usr/share/man/de/man8 /usr/share/man/de/man8/update-passwd.8.gz /usr/share/man/es /usr/share/man/es/man8 /usr/share/man/es/man8/update-passwd.8.gz /usr/share/man/fr /usr/share/man/fr/man8 /usr/share/man/fr/man8/update-passwd.8.gz /usr/share/man/ja /usr/share/man/ja/man8 /usr/share/man/ja/man8/update-passwd.8.gz /usr/share/man/man8 /usr/share/man/man8/update-passwd.8.gz /usr/share/man/pl /usr/share/man/pl/man8 /usr/share/man/pl/man8/update-passwd.8.gz /usr/share/man/ru /usr/share/man/ru/man8 /usr/share/man/ru/man8/update-passwd.8.gz $dpkg -S /bin/datecoreutils: /bin/date $dpkg -s coreutilsPackage: coreutils Essential: yes Status: install ok installed Priority: required Section: utils Installed-Size: 15719 Maintainer: Michael Stone <mstone@debian.org> Architecture: amd64 Multi-Arch: foreign Version: 8.30-3 Pre-Depends: libacl1 (>= 2.2.23), libattr1 (>= 1:2.4.44), libc6 (>= 2.28), libselinux1 (>= 2.1.13) Description: GNU core utilities This package contains the basic file, shell and text manipulation utilities which are expected to exist on every operating system. . Specifically, this package includes: arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp csplit cut date dd df dir dircolors dirname du echo env expand expr factor false flock fmt fold groups head hostid id install join link ln logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac tail tee test timeout touch tr true truncate tsort tty uname unexpand uniq unlink users vdir wc who whoami yes Homepage: http://gnu.org/software/coreutils $dpkg -l 'b*'Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-====================-===============-===============-================================================== un backupninja <none> <none> (no description available) un backuppc <none> <none> (no description available) un baobab <none> <node> (no description available) un base <none> <none> (no description available) un base-config <none> <none> (no description available) ii base-files 11 amd64 Debian base system miscellaneous files ii base-passwd 3.5.46 amd64 Debian base system master password and group files ii bash 5.0-4 amd64 GNU Bourne Again SHell [..] $dpkg -c /var/cache/apt/archives/gnupg-utils_2.2.12-1_amd64.debdrwxr-xr-x root/root 0 2018-12-15 02:17 ./ drwxr-xr-x root/root 0 2018-12-15 02:17 ./usr/ drwxr-xr-x root/root 0 2018-12-15 02:17 ./usr/bin/ -rwxr-xr-x root/root 3516 2018-12-15 02:17 ./usr/bin/gpg-zip -rwxr-xr-x root/root 866256 2018-12-15 02:17 ./usr/bin/gpgcompose -rwxr-xr-x root/root 30792 2018-12-15 02:17 ./usr/bin/gpgparsemail -rwxr-xr-x root/root 84432 2018-12-15 02:17 ./usr/bin/gpgsplit -rwxr-xr-x root/root 154952 2018-12-15 02:17 ./usr/bin/gpgtar -rwxr-xr-x root/root 166568 2018-12-15 02:17 ./usr/bin/kbxutil -rwxr-xr-x root/root 1081 2017-08-28 12:22 ./usr/bin/lspgpot -rwxr-xr-x root/root 2194 2018-11-18 23:37 ./usr/bin/migrate-pubring-from-classic-gpg -rwxr-xr-x root/root 121576 2018-12-15 02:17 ./usr/bin/symcryptrun -rwxr-xr-x root/root 18424 2018-12-15 02:17 ./usr/bin/watchgnupg drwxr-xr-x root/root 0 2018-12-15 02:17 ./usr/sbin/ -rwxr-xr-x root/root 3075 2018-12-15 02:17 ./usr/sbin/addgnupghome -rwxr-xr-x root/root 2217 2018-12-15 02:17 ./usr/sbin/applygnupgdefaults drwxr-xr-x root/root 0 2018-12-15 02:17 ./usr/share/ drwxr-xr-x root/root 0 2018-12-15 02:17 ./usr/share/doc/ [...] $dpkg -I /var/cache/apt/archives/gnupg-utils_2.2.12-1_amd64.debnew Debian package, version 2.0. size 857408 bytes: control archive=1844 bytes. 1564 bytes, 32 lines control 1804 bytes, 28 lines md5sums Package: gnupg-utils Source: gnupg2 Version: 2.2.12-1 Architecture: amd64 Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org> Installed-Size: 1845 Depends: libassuan0 (>= 2.0.1), libbz2-1.0, libc6 (>= 2.25), libgcrypt20 (>= 1.8.0), libgpg-error0 (>= 1.26-2~), libksba8 (>= 1.3.4), libreadline7 (>= 6.0), zlib1g (>= 1:1.1.4) Recommends: gpg, gpg-agent, gpgconf, gpgsm Breaks: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4) Replaces: gnupg (<< 2.1.21-4), gnupg-agent (<< 2.1.21-4) Section: utils Priority: optional Multi-Arch: foreign Homepage: https://www.gnupg.org/ Description: GNU privacy guard - utility programs GnuPG is GNU's tool for secure communication and data storage. . This package contains several useful utilities for manipulating OpenPGP data and other related cryptographic elements. It includes: . * addgnupghome -- create .gnupg home directories * applygnupgdefaults -- run gpgconf --apply-defaults for all users * gpgcompose -- an experimental tool for constructing arbitrary sequences of OpenPGP packets (e.g. for testing) * gpgparsemail -- parse an e-mail message into annotated format * gpgsplit -- split a sequence of OpenPGP packets into files * gpgtar -- encrypt or sign files in an archive * kbxutil -- list, export, import Keybox data * lspgpot -- convert PGP ownertrust values to GnuPG * migrate-pubring-from-classic-gpg -- use only "modern" formats * symcryptrun -- use simple symmetric encryption tool in GnuPG framework * watchgnupg -- watch socket-based logs [..]
dpkg は /var/log/dpkg.log に作業のすべてを記録します。/var/log/dpkg.log は極めて詳細です。なぜなら /var/log/dpkg.log には dpkg がパッケージに対して行った操作の各段階すべてが詳しく記録されているからです。dpkg の挙動を追跡する方法を提供することに加えて、/var/log/dpkg.log はシステムの変化の履歴を保存するのに役立ちます。すなわち、パッケージがインストールされたり更新された正確な日時を探すことが可能ですし、この情報は最近の挙動変化を理解するのに極めて役立ちます。加えて、すべてのバージョンが記録されていますから、注目しているパッケージの changelog.Debian.gz またはオンラインバグ報告と情報を簡単に照合できます。
Architecture フィールドを持っています。Architecture フィールドでは「all」(アーキテクチャに依存しないパッケージ) または対象のアーキテクチャの名前 (「amd64」、「armhf」など) のどちらか一方を指定します。対象アーキテクチャの名前が指定されていた場合、初期設定では dpkg は dpkg --print-architecture で返されるホストのアーキテクチャと一致するアーキテクチャ向けのパッケージのインストールだけを受け入れます。
dpkg のマルチアーキテクチャサポートのおかげで、ユーザは現在のシステムにインストールできる「外来アーキテクチャ」を定義できます。これを行うには、以下に示す通り dpkg --add-architecture を使ってください。関連して、dpkg --remove-architecture は外来アーキテクチャのサポートを取り消しますが、取り消したいアーキテクチャのパッケージが残っていた場合には失敗します。
#dpkg --print-architectureamd64 #dpkg --print-foreign-architectures#dpkg -i gcc-8-base_8.3.0-6_armhf.debdpkg: error processing archive gcc-8-base_8.3.0-6_armhf.deb (--install): package architecture (armhf) does not match system (amd64) Errors were encountered while processing: gcc-8-base_8.3.0-6_armhf.deb #dpkg --add-architecture armhf#dpkg --add-architecture armel#dpkg --print-foreign-architecturesarmhf armel #dpkg -i gcc-8-base_8.3.0-6_armhf.deb(Reading database ... 14319 files and directories currently installed.) Preparing to unpack gcc-8-base_8.3.0-6_armhf.deb ... Unpacking gcc-8-base:armhf (8.3.0-6) ... Setting up gcc-8-base:armhf (8.3.0-6) ... #dpkg --remove-architecture armhfdpkg: error: cannot remove architecture 'armhf' currently in use by the database #dpkg --remove-architecture armel#dpkg --print-foreign-architecturesarmhf
Multi-Arch: same” header field to tell the packaging system that the various architectures of the package can be safely co-installed (and that those packages can only satisfy dependencies of packages of the same architecture). The most important libraries have been converted since the introduction of multi-arch in Debian 7 Wheezy, but there are many libraries that will likely never be converted unless someone specifically requests it (through a bug report for example).
$dpkg -s gcc-8-basedpkg-query: error: --status needs a valid package name but 'gcc-8-base' is not: ambiguous package name 'gcc-8-base' with more than one installed instance Use --help for help about querying packages. $dpkg -s gcc-8-base:amd64 gcc-8-base:armhf | grep ^MultiMulti-Arch: same Multi-Arch: same $dpkg -L libgcc1:amd64 |grep .so/lib/x86_64-linux-gnu/libgcc_s.so.1 $dpkg -S /usr/share/doc/gcc-8-base/copyrightgcc-8-base:amd64, gcc-8-base:armhf: /usr/share/doc/gcc-8-base/copyright
Multi-Arch: same パッケージを取り扱う際には、パッケージの名前にアーキテクチャの限定詞を付けて対象を明確に識別しなければいけない点は注目に値します。Multi-Arch: same パッケージは対象アーキテクチャの異なる同じパッケージ間でファイルを共有しているかもしれません。さらに対象アーキテクチャの異なる同じパッケージ間でファイルが共有されている場合、dpkg は共有されているファイルがビット単位で一致することを確認します。最後に重要なことですが、パッケージは対象アーキテクチャごとにバージョンが違ってはいけません。対象アーキテクチャの異なるパッケージも必ず同時にアップグレードされなければいけません。
Multi-Arch: foreign」と宣言されているか、依存パッケージ群の 1 つのパッケージとアーキテクチャが一致しているかのどちらか一方を満足させる必要があります (依存関係解決処理中、アーキテクチャに依存しないパッケージはホストと同じアーキテクチャと仮定されます)。package:any 構文はどんなアーキテクチャでも依存関係を満足できることを意味しますが、外来パッケージを使って package:any 構文で表記された依存関係を満足できるのは「Multi-Arch: allowed」と宣言されていた場合のみです。